Royale Lustre
A water-based lustre finish with a tough, shimmering surface. It can be rolled to a textured Dana pattern or finished smooth.
Best for: Living rooms, Accent walls, Walls that need a tough washable surface
At a glance
- Coverage
- 7-8 sq m per litre (1 coat); 4-4.6 sq m per litre (2 coats), brush and roller
- Coats
- 2
- Touch dry
- 30 minutes (surface dry)
- Recoat after
- 4-6 hours
- Thinning / mixing
- Dana pattern: no dilution. Smooth finish: 200-300 ml water per litre (product page)
- Apply with
- Brush or roller (felt roller for smooth, honeycomb roller for Dana)
- Pack sizes
- 1 L, 4 L, 10 L, 20 L
- Shades
- 1750+ shades (PIS)
- Warranty
- 8 years (shade and film integrity); anti-fungal 5 years, per warranty document
- Low VOC / green
- Lower VOC than solvent-based lustre
- Shelf life
- 3 years
- Good to know
- Rich sheen, about 40-70 at 85 degrees
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Rich lustre sheen
- Teflon surface protector for stain resistance
- Anti-fungal shield
- Anti-yellowing
- Water-based with lower VOC than solvent lustre
How to use it
Sand with 180 grit and wipe clean. Remove loose paint, dust, grease and fungus; let new masonry cure 28 days. Prime, putty, then topcoat.
Recommended system
- Decoprime ST Primer or Royale Wall Basecoat
- Acrylic Wall Putty
Source These details are taken from Asian Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.