WoodTech Epoxy Insulator
A solvent-based epoxy insulator for wood. It soaks in to make a stronger film and blocks oils and resins from bleeding into the topcoat.
Best for: Oily woods such as teak, Interior and exterior wood, Under clear or coloured wood finishes
At a glance
- Coverage
- 10-12 sq m per litre per coat by ragging; 8-9 sq m per litre per coat by spray
- Coats
- 2
- Recoat after
- 3-4 hours
- Thinning / mixing
- 15-30% PU thinner if required
- Apply with
- Ragging or spray
- Pack sizes
- Kit of 1 L, 2 L or 4 L (page lists 2 L and 4 L)
- Pot life
- Use mixed base and hardener within one week of opening
- Good to know
- Mixing ratio base:hardener 50:50 by volume; do not use steel wool between coats
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Two-pack epoxy (base and hardener, 50:50)
- Penetrates wood for a stronger film
- Strong insulation against oil and moisture in wood
- Clear coat keeps natural wood colour
- Interior and exterior use
How to use it
Wood moisture should be 10-15%. Sand along the grain with 180, then 320 or 400. Keep the surface free of dust, oil and grease.
Recommended system
- WoodTech Filler
- WoodTech topcoat of your choice
Source These details are taken from Asian Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.