Dr. Fixit Pidiproof LW+
A liquid that you add to cement while mixing concrete or plaster, so the slab and walls resist water from the day they are built. It also helps protect the steel bars inside from rusting.
Best for: New roof slabs and beams, Wall plaster and screeds, Water tanks during construction, Tile bedding mortar
At a glance
- Coverage
- 200 ml per 50 kg bag of cement
- Apply with
- Added to the mixing water of concrete or mortar
- Pack sizes
- 200 ml, 1, 5, 10, 20 & 100 litre
- Shelf life
- 2 years from date of manufacture (sealed pack)
- Good to know
- Conforms to IS 9103-2018 and IS 2645; water permeability reduced by at least 50% vs control; keep water-cement ratio below 0.5
Why choose it
- Mixed into concrete and mortar, not applied on top
- Cuts down how much water can pass through concrete
- Helps reduce early shrinkage cracks in plaster
- Gives added protection to steel reinforcement against corrosion
- Works with all common cement and sand types
How to use it
Dry-mix cement and aggregates first, then dissolve the measured dose in the last part of the mixing water and mix well. Keep the water-cement ratio as low as practical.
Recommended system
Source These details are taken from Dr. Fixit's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.