Aquaglo Metal Primer
A rust-resistant, water-based grey primer for metal. It has high bonding, low VOC and low odour and gets metal ready for topcoats.
Best for: Metal gates, grills and railings, New or pre-painted metal, Low-odour metal jobs
At a glance
- Coverage
- 160-180 sq.ft. per litre per coat (14.8-16.7 m2/L)
- Coats
- 1 coat plus a touch-up coat
- Touch dry
- 30 minutes (surface dry)
- Recoat after
- 4 hours
- Thinning / mixing
- 5% clean water by volume
- Apply with
- Brush and short nap felt roller
- Low VOC / green
- <10 g/L
- Good to know
- Vehicle: acrylic; flash point above 200C
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Rust resistant
- High bonding to metal
- Water based, low VOC and low odour
- Quick drying
- Non-flammable (flash point above 200C)
How to use it
Make sure metal is free of dirt, oil, grease, rust and mill scale. Wire-brush loose rust and old paint, sand with 180 paper and wipe clean. Fill dents with knifing putty and sand smooth.
Recommended system
- Halo Aquaglo Majestic Gloss or Satin as topcoat
Source These details are taken from JSW Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Also consider
From other brands
TrishulSTP Metal Primer (Red Oxide)Metal primers & protective coats
Asian PaintsSmartCare High Performance Red Oxide Metal PrimerMetal primers & protective coats
Birla OpusBirla Opus Prime NR8 Solvent Thinnable Red Oxide Metal PrimerPrimer (red oxide)
BergerButterfly AC Metal Primer ROMetal primers & protective coatsLet's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.