Metal ColourDur
A solvent-based direct-to-metal PU enamel in high gloss for metal, wood and masonry. It acts as primer and paint and helps stop rust.
Best for: Metal gates, grills and railings, Wooden doors, Quick-dry gloss enamel jobs
At a glance
- Coverage
- 90-110 sq.ft. per litre for 2 coats
- Coats
- 2
- Touch dry
- 30 minutes (surface dry)
- Recoat after
- 6-8 hours
- Thinning / mixing
- 5-10% by volume with mineral turpentine oil
- Apply with
- Brush, roller or spray
- Shades
- 410+ colours; direct shades include brilliant white, black, brown, golden brown, smoke grey, signal red, golden yellow and more
- Warranty
- Endures 3 years (subject to PIS conditions)
- Shelf life
- 36 months
- Good to know
- Gloss level 85 +/-5 at 60 degrees; vehicle PU alkyd; do not apply below 10C or above 45C
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Primer and paint in one (DTM PU enamel)
- Anti-rust
- Endures up to 3 years under stated conditions
- Easy to clean, high opacity
- Works indoors and outdoors
How to use it
Metal: free of dirt, oil, grease and rust, wire-brush loose rust, smooth sharp weld edges, sand with 320 emery and wipe clean.
Recommended system
- ColourDur top coat, 2 coats
- Acrylic or wall putty on wood or masonry where needed
Source These details are taken from JSW Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.