Wall Texture Tough Exteriors Bubble Tex
An acrylic-resin exterior texture with quartz sand that gives a bubble-pattern finish. It is sprayed on and protects against rain and humidity.
Best for: Exterior feature walls, Hiding minor surface flaws, Rain-exposed facades
At a glance
- Coverage
- 7-9 sq.ft. per kg per coat (0.65-0.83 m2/kg)
- Coats
- 1
- Touch dry
- 30-60 minutes (surface dry)
- Recoat after
- Full dry 12-16 hours
- Thinning / mixing
- Not recommended
- Apply with
- Air-assisted spray recommended
- Pack sizes
- 20 L
- Low VOC / green
- <20 g/kg
- Good to know
- White; binder acrylic modified resin
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Acrylic modified resin reinforced with quartz sand
- All-weather durability, water resistant
- Anti-algal
- Hides cracks and has high bonding
- Lets trapped moisture escape
How to use it
Clean, sound new masonry or well-prepared repaint surface; repair structural cracks first.
Recommended system
- JSW Wall Primer Exteriors
- Exterior emulsion topcoat (Halo, Aurus, Pixa)
Source These details are taken from JSW Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.