LATICRETE 307
A polymer-based adhesive for small to medium ceramic and vitrified tiles and small natural stone on interior floors and walls.
Best for: Interior floors and walls up to 3 m height, Tiles up to 600 x 600 mm, Tile-on-tile fixing
At a glance
- Coverage
- Approx. 55-60 sq ft per 20 kg bag (6 mm trowel, 3 mm bed)
- Coats
- Bed up to 12 mm max
- Pack sizes
- 20 kg, 50 kg (grey, white)
- Pot life
- 3-4 hours at 21 C
- Curing
- Heavy traffic in 16-24 hours; grout after minimum 24 hours
- Good to know
- Water: about 5.5-6 L per 20 kg. ANSI A118.1T, EN 12004 C1T, IS 15477:2019 Type 1T/Type 2T (page)
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Add water only
- Can be beaten in with a rubber mallet to level
- Works on cement mortar, plaster, brick, terrazzo
- Meets IS 15477 Type 1T
How to use it
Remove dirt, oil, paint, laitance and sealers. Dampen dry concrete. New slabs need 28 days cure unless latex admix is used.
Source These details are taken from MYK Laticrete's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.