Smartcare Primero
An alkali-resistant water-based primer and sealer with silicone additives. It works on interior and exterior cement plaster, even fresh plaster.
Best for: Fresh or green cement plaster, Walls with efflorescence, Interior and exterior plaster
At a glance
- Coverage
- 100-120 sq ft per litre, 1 coat, on smooth masonry by brush
- Coats
- 1
- Recoat after
- 4-5 hours
- Thinning / mixing
- About 100% with water
- Apply with
- Brush or roller
- Pack sizes
- 1 L, 4 L, 20 L
- Shades
- White
- Shelf life
- 3 years
- Good to know
- Up to 10% higher topcoat coverage; alkalinity up to pH 12.5
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Seals very absorbent plaster
- Prevents efflorescence
- Up to 10% more topcoat coverage than conventional exterior primers
- Works on surfaces up to pH 12.5
- Can go on surfaces with mild moisture
How to use it
Clean off dirt, loose plaster, oil and grease, and remove algae with a wire brush. Fill cracks up to 3 mm with SmartCare Crack Seal or white cement and sand 1:3. Sand with 180 grit and wipe clean.
Recommended system
- Asian Paints TruCare Wall Putty (optional)
- Emulsion topcoat
Source These details are taken from Asian Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.