Trucare Filling Putty
A white-cement putty built to level large dips and bumps on cement plaster and pre-cast surfaces. It can be built up to 10 mm.
Best for: Very uneven plaster, Pre-cast formwork, Interior or exterior levelling
At a glance
- Coverage
- 2-3 sq ft per kg for 5 mm thickness (coverage depends on the surface)
- Coats
- 1 (up to 6 mm) or 2 (up to 10 mm)
- Touch dry
- Surface dry in 30 minutes
- Recoat after
- 6-8 hours
- Thinning / mixing
- 20-30% water
- Apply with
- Putty knife or trowel
- Pack sizes
- 40 kg
- Shades
- White
- Shelf life
- 1 year
- Good to know
- Pre-wet the wall before the first coat
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Levels large undulations
- One coat up to 6 mm, two coats up to 10 mm
- Good abrasion resistance
- Good water resistance
- No water curing needed
How to use it
Let new plaster cure 28 days. Clean off dirt, loose plaster, grease and algae. Pre-wet the wall with water. Sand with 180 grit between steps. Top with Wall Putty, primer and emulsion.
Recommended system
- Asian Wall Putty (recommended over it)
- Primer and 2-3 coats of emulsion
Source These details are taken from Asian Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.