Dampstop Advanced
A ready-to-use, single-pack damp-proofing coat that partly soaks in and partly forms a film on the wall. It blocks dampness and stops salts leaching out, and can be painted over after it dries.
Best for: Damp walls inside, Seepage and efflorescence, Old and new walls
At a glance
- Coverage
- 45-55 sq ft per litre per coat
- Coats
- 1; a 2nd coat may be needed on low-porosity surfaces
- Recoat after
- Minimum 60 minutes at 30 C
- Thinning / mixing
- Use undiluted
- Apply with
- Brush or spray
- Warranty
- 5 years on dampness and efflorescence (terms apply)
- Shelf life
- At least 1 year (unopened, 10-40 C)
- Curing
- Hard dry at least 6 hours at 30 C
- Good to know
- Apply on saturated surface-dry (SSD) wall. Not for active leakage. Do not apply below 10 C or above 90% humidity. Do not apply topcoat directly over it.
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Ready to use, one component
- Nano additives block wall pores
- Prevents salt leaching (efflorescence)
- Works on new and old surfaces
- Good adhesion
How to use it
Clean off oil and loose particles, fill cracks under 5 mm with crack paste, repair larger damage with polymer-modified mortar.
Recommended system
- Clean substrate; no primer needed
- Putty can be applied after it dries
Source These details are taken from Berger's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.