Dr. Fixit Bitufix
A water-based bitumen emulsion that dries to a black, flexible film. It is cold applied as a damp-proof and vapour barrier on below-ground concrete and block work.
Best for: Foundations and below-ground walls, Block work before cladding, Protective coat on built-up roofing
At a glance
- Coverage
- 4 m²/litre per coat at 125 microns
- Coats
- Minimum 2, applied crosswise
- Recoat after
- Firm set 24 hours
- Thinning / mixing
- Primer: diluted with 20% water
- Apply with
- Roller, brush or airless spray
- Pack sizes
- 5 & 20 litre
- Shelf life
- Up to 12 months
- Good to know
- Application temperature 5°C to 55°C
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Cold applied, water based
- Resists chlorides and sulphates in soil
- Forms a black flexible protective film
- Easy to use in tight spaces
- Non-flammable
How to use it
Clean off dust, curing compound, oil and grease and repair unsound concrete. Prime with a thinned coat first.
Recommended system
Source These details are taken from Dr. Fixit's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.