Wall Putty Cement Based
A cement-based wall putty powder that fills, levels and bonds well, with little dust. It is water resistant and low VOC.
Best for: Interior and exterior walls, New masonry and repaints, Smooth base before painting
At a glance
- Coverage
- 10-15 sq.ft. per kg for 2 coats (0.9-1.4 m2/kg; up to 1.5 mm thickness)
- Coats
- 2
- Touch dry
- 30 minutes (surface dry)
- Recoat after
- 6-8 hours (PIS steps: 3-4 hrs between putty coats, 6-8 hrs before sanding)
- Thinning / mixing
- 35-40% potable water per 1 kg of putty
- Apply with
- Putty knife
- Good to know
- Binder: cement and polymer; sand with 180 then 320 mesh paper
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Strong filling and surfacing
- Low dust, quick drying
- Strong adhesion to wall and topcoat
- Water resistant, low VOC
- Super white, smooth on sanding
How to use it
Clean, dry, sound surface; repair structural cracks first; apply putty in coats with a putty knife; sand when dry.
Recommended system
- Primer then topcoat
Source These details are taken from JSW Paints's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.