Sheenlac Xperia 2K Epoxy Insulator
A clear two-pack epoxy barrier coat for oily woods such as teak. It stops the oil from bleeding into the topcoat.
Pot lifeMix only what can be used in 30-45 minutes
Best for: Oil-rich wood, Under PU, polyester, melamine or acrylic topcoats
At a glance
- Recoat after
- 3 hours before sanding; if over 8 hours, sand and recoat with the insulator before the next coat
- Thinning / mixing
- None normally; add 5-10% PU Thinner D-67 above 35 C
- Apply with
- Brush, spray or rag
- Pack sizes
- 1 L
- Pot life
- Mix only what can be used in 30-45 minutes
- Good to know
- Mix ratio 1:1 by volume (base : hardener)
Why choose it
- Dries fast to a hard clear film
- Good solvent and water resistance
- Stops topcoat soaking into the grain
- Brush, spray or rag application
How to use it
Apply a thin coat on sanded wood; sand lightly to remove raised fibres and dust before the next coat.
Recommended system
Source These details are taken from Sheenlac's official website and technical data sheet, and written in simple words by APS. Some values are still being confirmed with the brand. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.