AquaArm Crystalline IC
A one-part crystalline slurry that soaks into concrete and grows crystals in the pores to block water. It works from either side of the wall, even against water pressure.
Best for: Basements and lift pits, Underground sumps and water tanks, Retaining walls and foundations
At a glance
- Coverage
- 1.5 kg/m² in two coats
- Coats
- 2 (brush)
- Apply with
- Brush, spray or dry-sprinkle on fresh slabs
- Pack sizes
- 10 kg and 25 kg bags
- Low VOC / green
- 0 g/L
- Shelf life
- 12 months (unopened, dry)
- Pot life
- 30 minutes @ 23°C/60% RH
- Curing
- Keep damp 2-3 days (7 days for drinking-water tanks); fill containers after approx. 7 days; full effect up to 1 month
- Good to know
- Mix with 6.75-8.0 L water; water impermeability 13 bar; complies with BS 8102:2009 and IS 16471:2017 Type B
Why choose it
- Works on the wet side or the dry (negative) side
- Self-heals fine cracks up to 0.4 mm
- Resists high water pressure (13 bar)
- Can go on damp or fresh concrete
- Chloride free, zero VOC
How to use it
Concrete must be sound, clean and porous. Remove coatings and laitance, cut out cracks wider than 0.4 mm and repair, then pre-wet to a matt-damp state.
Source These details are taken from MYK Arment's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.