AquaArm Damp Coat
A water-thinnable two-part epoxy coating for damp walls and water tanks. It soaks into plaster, seals pores and fine cracks, and can be used as a primer before painting.
Best for: Damp inside and outside walls, Concrete water tanks, Toilet and kitchen walls, Primer under paint on damp-prone walls
At a glance
- Coverage
- Coating: 7.5-8.5 m²/kg per coat; as cement putty: 0.6-0.8 m²/kg per coat
- Coats
- 2
- Touch dry
- 1-2 hours @ 30°C
- Recoat after
- 16-18 hours @ 30°C (TDS application section mentions 6-hour intervals)
- Apply with
- Nylon brush
- Pack sizes
- 1 kg (base + hardener)
- Shelf life
- 12 months at 27°C (unopened)
- Pot life
- Approx. 60 minutes @ 27°C
- Curing
- Initial 24 hours; full cure 7 days @ 30°C
- Good to know
- Mix 1:1:1 base : hardener : water by weight; do not apply below 10°C or over painted surfaces; exterior use needs a weatherproof top coat
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- Thinned with water, no solvent smell
- Seals pores and fine cracks in plaster
- Can be mixed with white cement to make a crack-filling putty
- Resists fungus and mild chemicals
- Non-toxic and non-flammable
How to use it
Remove all old paint fully. Wire brush and sand off dirt, loose plaster, fungus and moss, then remove dust.
Source These details are taken from MYK Arment's official website and technical data sheet, and written in simple words by APS. Some values are still being confirmed with the brand. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.