AquaArm Tank Coat
A water-thinnable two-part epoxy coating for the inside of concrete water tanks. It is certified non-toxic for drinking water and forms a hard, tough lining.
Best for: Concrete drinking-water tanks and sumps, Damp toilet and kitchen walls, Hygienic areas such as food units
At a glance
- Coverage
- Coating: 7.5-8.5 m²/kg per coat; as cement putty: 0.6-0.8 m²/kg per coat
- Coats
- 2
- Touch dry
- 1-2 hours @ 30°C
- Recoat after
- 6-8 hours after first coat (per application steps)
- Apply with
- Nylon brush
- Pack sizes
- 1.0 kg (base + hardener)
- Shelf life
- 12 months at 27°C (unopened)
- Pot life
- Approx. 60 minutes @ 27°C
- Curing
- Initial 24 hours; full cure 7 days @ 30°C; cure 3-4 days before storing water if left exposed
- Good to know
- Mix 1:1:1 base : hardener : water by weight (max 500 ml water); hard dry 16-18 hours; putty = 1 part base + 1 part hardener + 2 parts white cement
How much will I need?
A rough estimate from the coverage on the data sheet. Real coverage depends on the wall.
Enter the wall area or room size.
Why choose it
- CFTRI certified non-toxic for potable water
- Thinned with water, solvent free
- Seals pores and fine cracks, cuts water seepage
- Hard, tough film with good chemical resistance
- Resists fungus and microbes
How to use it
Strip off any old coating. Wire brush and sand to remove dirt, loose plaster and fungus. Cut open cracks to a groove and fill with the putty a day before coating.
Source These details are taken from MYK Arment's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.