AquaArm Top Guard
A two-part cement and acrylic polymer coating that forms a flexible waterproof skin. Made for small roofs, balconies, chajjas and bathroom floors.
Best for: Roofs and terraces, Balconies and chajjas, Bathroom and toilet floors before tiling
At a glance
- Coverage
- 1.5-2.5 kg/m² (depending on requirement)
- Coats
- 2
- Recoat after
- 6-8 hours @ 30°C
- Apply with
- Hard bristle brush on pre-wetted (SSD) surface
- Pack sizes
- 3 kg, 8 kg, 20 kg, 40 kg composite packs
- Low VOC / green
- 0.5 gm/Ltr
- Shelf life
- 24 months from date of manufacture
- Pot life
- 30 minutes @ 27°C/60% RH; 60 minutes @ 20°C/60% RH
- Curing
- Rain resistant approx. 4 hours (vertical) / 12 hours (horizontal) @ 30°C; foot traffic after approx. 2 days @ 30°C
- Good to know
- Mix ratio 3:1 powder to liquid by weight; elongation approx. 40%; tensile strength 0.86 N/mm²; water penetration resistance 1.5 Bar; hardness approx. 90 Shore A
Why choose it
- Two-part pack: powder plus polymer liquid
- Stays flexible after it sets, so it can handle small movement
- Lets moisture vapour escape (breathable)
- Cures on its own without water curing
- Solvent free
How to use it
Surface must be sound and clean. Rough up smooth floor areas, repair cracks and honeycombs, tape floor-wall joints, then dampen the surface without leaving puddles.
Recommended system
- SealArm Joint Tapes
Source These details are taken from MYK Arment's official website and technical data sheet, and written in simple words by APS. Brands update their products from time to time, so please check the pack and the latest data sheet before use. See the official page
Let's make your home beautiful.
Send us a photo of your wall on WhatsApp. We'll suggest the right products and give you a free quote.